Table of Contents
Advertisement
Security System
User Guide
Maintenance and Service
This security system requires very little maintenance; however, you should test the system weekly to ensure it is working
properly. A test schedule and maintenance program can be arranged. If you notice a change in operation during normal use
or testing, call for service as soon as possible. Do not attempt to repair the control panel, command centers, or detectors
yourself.
See page 2 for security company, contact, and installation information.
Power Failure
If the command center indicates a power failure and you have power in the rest of your premises, there may be a problem
with the electrical transformer or circuit breaker supplying power to your security control panel. First, check to be sure that
the transformer is securely plugged into the electrical outlet. If it appears to be damaged in any way, do not attempt to repair
it. Call your security company for service.
See page 2 for transformer information.
If the transformer is plugged in, check the circuit breaker supplying power to the outlet. If the breaker is tripped, check the
appliances on the circuit for signs of electrical problems. Make sure someone has not intentionally turned the breaker off.
When all is clear, reset the breaker.
See page 2 for the circuit breaker number.
How to Clean the command center
If your command center gets dirty, apply a household glass cleaner to a clean cloth or paper towel and wipe the surface. Do
not spray any liquid directly onto the command center. It could run inside the case and damage electrical circuits.
D623/D625 User Guide
46841D
Page 48
© 2003 Bosch Security Systems
Advertisement
Table of Contents
