Configuring Basic Settings; Identifying Network Settings - Juniper JSA1500 Hardware Manual

CHAPTER 18

Configuring Basic Settings

Identifying Network Settings

Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
Identifying Network Settings on page 113
Identifying Security Monitoring Devices and Flow Data Sources on page 114
Identifying Network Assets on page 114
Before you install Juniper Secure Analytics (JSA), you must have the following information
for each system you want to install:
NOTE: When you configure the network setting such as hostname and IP
address using the qchange_netsetup script, the JSA appliance hangs while
rebooting. This issue is seen in 2013.2.r3.607582 and it will be fixed in the
future releases. You need to manually power cycle the JSA appliance to
overcome this issue.
Hostname
IP address
Network mask address
Subnet mask
Default gateway
Primary DNS server
Secondary DNS server (optional)
Public IP address for networks using Network Address Translation (NAT)
E-mail server
NTP server (Console only) or Time server
JSA Components on page 91
Browser Support on page 92
Preparing the Network Hierarchy on page 93
113