Connecting Jsa To A Dc Power Source; Figure 16: Grounding The Jsa7500 Appliance - Juniper JSA1500 Hardware Manual

Juniper Secure Analytics Hardware Guide
Related
Documentation

Connecting JSA to a DC Power Source

98
To ground the JSA7500 appliance:
Connect the grounding cable to a proper earth ground.
1.
Verify that a licensed electrician has attached the grounding lug to the grounding
2.
cable.
Place the grounding cable lug over the grounding points on the side of the chassis as
3.
shown in Figure 16 on page

Figure 16: Grounding the JSA7500 Appliance

1— 10-32 x 1/4-in. Pan-head screws
2— 1 mm washer
Secure the grounding cable lug to the grounding points with the screws and washers
4.
as shown in Figure 16 on page
Dress the grounding cable, and verify that it does not touch or block access to the
5.
JSA7500 components and that it does not cause a tripping hazard.
Connecting JSA to a DC Power Source on page 98
Installing the JSA Hardware on page 103
Chassis Console Port Pinouts on page 9
Before connecting your Juniper Secure Analytics (JSA) appliance to a DC power source:
98.
3— Grounding lug
4— Grounding points
98.
Copyright © 2018, Juniper Networks, Inc.