Related
Documentation
JSA5800 Appliance Back Panel Description
Copyright © 2018, Juniper Networks, Inc.
Table 18: JSA5800 Front Panel LEDs (continued)
Callout
LEDs
5
LAN1
6
Information
JSA5800 Appliance Description
JSA5800 Appliance Back Panel Description on page 27
Figure 8 on page 23
shows the back panel components of the JSA5800 appliance.
Figure 11: JSA5800 Back Panel
Table 16 on page 23
lists the back panel components of the JSA5800 appliance.
Chapter 6: JSA5800
Description
When blinking, it indicates
Management interface activity.
Red (blinking)—Indicates a fan
failure.
Solid red—Indicates an overheat
condition, which might be
caused by cables obstructing
the airflow in the system or the
ambient room temperature
being too warm.
You can perform the following
checks:
Check the routing of the
cables and ensure that all
fans are present and
operating normally.
Ensure that the chassis
covers are installed.
Verify that the heatsinks are
installed properly.
Red (slowly blinking)—Indicates
a power failure.
Solid blue —Indicates UID
function is activated.
27