Table of Contents
Advertisement
Copyright © 2018, Juniper Networks, Inc.
Pull the lever out as shown in
4.
Grasp the fan protected with the cover and pull it out to disengage its power connection
5.
as shown in
Figure 30 on page
Figure 30: Removing the Fan
Wait for the fan to stop spinning.
6.
WARNING:
To avoid injury, do not proceed until the fan has stopped
spinning.
Replace the fan and then close the lever as shown in
7.
Figure 31: Replacing the Fan
Install the fan in the device as shown in
8.
Chapter 20: Maintaining the Hardware
Figure 30 on page
125.
125.
Figure 31 on page
Figure 31 on page
125.
125.
125
Advertisement
Table of Contents
