Chassis Lifting Guidelines For Jsa; Ramp Warning - Juniper JSA1500 Hardware Manual

Juniper Secure Analytics Hardware Guide
Related
Documentation

Chassis Lifting Guidelines for JSA

Related
Documentation

Ramp Warning

56
Varning! Läs installationsanvisningarna innan du kopplar systemet till dess
strömförsörjningsenhet.
Ramp Warning on page 56
Rack-Mounting Warnings on page 57
Grounded Equipment Warning on page 61
Maintenance and Operational Safety Guidelines and Warnings on page 62
The weight of a fully loaded Juniper Secure Analytics (JSA) appliance is approximately
27 lb (12 kg). Observe the following guidelines for lifting and moving a JSA appliance:
Before installing a JSA appliance, read the guidelines in
Guidelines for the JSA Appliance" on page
Before lifting or moving the JSA appliance, disconnect all external cables.
As when lifting any heavy object, lift most of the weight with your legs rather than your
back. Keep your knees bent and your back relatively straight and avoid twisting your
body as you lift. Balance the load evenly and be sure that your footing is solid.
General Site Installation Guidelines for the JSA Appliance on page 38
Ramp Warning on page 56
Installation Instructions Warning on page 55
Rack-Mounting Warnings on page 57
Grounded Equipment Warning on page 61
Maintenance and Operational Safety Guidelines and Warnings on page 62
WARNING: When installing the device, do not use a ramp inclined at more
than 10 degrees.
Waarschuwing Gebruik een oprijplaat niet onder een hoek van meer dan 10
graden.
Varoitus Älä käytä sellaista kaltevaa pintaa, jonka kaltevuus ylittää 10 astetta.
Attention Ne pas utiliser une rampe dont l'inclinaison est supérieure à 10
degrés.
"General Site Installation
38.
Copyright © 2018, Juniper Networks, Inc.