Table of Contents
Advertisement
Juniper Secure Analytics Hardware Guide
Replacing the Fan on the JSA Appliance
124
The JSA1500 and JSA3500 appliances have two cooling fans. The JSA5500 has three
and the JSA7500 has eight cooling fans. The fans are hot-swappable.
NOTE:
JSA7500 has internal hot-swappable cooling fans.
Removing and installing fans for JSA1500, JSA3500, and JSA5500 follows
the similar procedure to JSA7500. Except that the cooling fans are to be
removed and installed from the top of the JSA7500 and for the rest of the
appliances, it is performed at the rear panel.
To remove and install the fan for JSA7500:
Attach an ESD grounding strap to your bare wrist and connect the strap to the ESD
1.
point on the chassis.
Turn the screws to the left on the fan door at the top of the device as shown in
2.
Figure 29 on page
124.
Figure 29: Opening the Chassis Lid
Open the lid as shown in
3.
Figure 29 on page
124.
Copyright © 2018, Juniper Networks, Inc.
Advertisement
Table of Contents
