Alarms List; Track; How To Start, Stop Recording The Track; How To Show Or Hide The Track Display - Furuno NAVnet TZtouch2 Operator's Manual

2.10.8

Alarms list

When an alarm is violated, you can see the name of the offending alarm on the
[Alarms] list. The list stores both warning and system messages. Open the home
screen, then tap [Lists] followed by [Alarms]. Active alarms are flashing and have a red
vertical bar at the let margin. Tap an active alarm to acknowledge it and stop the flash-
ing. After the cause of an alarm is removed, the alarm message is moved to [HISTOR-
IC] section. Tap the close button to close the list.
Message
Depth Alarm
Color on Status bar
2.11

Track

The track (or movement) of your ship is
plotted on the screen with position data
fed from the internal GPS navigator. Your
track lets you see how your ship has
moved over time.
The track is saved to the internal memory if track recording is activated. A line runs
between each track point. The internal memory stores a maximum of 30,000 track
points.
Track is saved when the power is turned off. Unnecessary track can be deleted. Track
can also be used to create a route.
2.11.1

How to start, stop recording the track

Start recording
Open the slide-out menu or tap the boat icon, then turn [Track] on.
Stop recording
Method 1: Tap the track, then tap [Stop Track].
Method 2: Open the slide-out menu or tap the boat icon, then turn [Track] off.
2.11.2

How to show or hide the track display

Open the [Layers] menu and turn [Tracks] on or off.
Date, time alarm generated
Track
2. PLOTTER
2-17