How To Measure The Range With The Vrm - Furuno NAVnet TZtouch2 Operator's Manual

6.8.5

How to measure the range with the VRM

The VRM is a dashed ring so that you can identify the VRM from the fixed range rings.
Method 1: From the data area
Open the data area. Tap the VRM indication in the [EBL/VRM] box. Drag the VRM or
slider to set the VRM. Tap [End VRM] to anchor the VRM and finish. The range to the
VRM appears to the left of the slider bar and in the [EBL/VRM] data box.
To clear the VRM, open the pop-up menu, the tap [EBL] and [Clear].
DATA ROUTE RADAR
EBL/VRM
box
Tap
here.
Range to
object
VRM
VRM
Drag
Drag Drag
VRM
VRM VRM
OR
Range to
object
VRM
VRM
6. RADAR
Tap [End VRM]
to anchor VRM
and exit.
Drag slider Drag slider
(or tap bar or +, - icons) (or tap bar or +, - icons)
6-9