Furuno NAVnet TZtouch2 Operator's Manual page 323

15. OTHER FUNCTIONS
Menu item
[Atmospheric Pressure]
[Oil Pressure]
[Volume]
[Reset Default Settings]
15.3 Initial Setup Menu
The [Initial Setup] menu, which is mainly for use by the installer of the equipment, sets
up the system according to the sensors connected. These adjustments require some
knowledge of marine electronics equipment. If you are unsure of your abilities, have a
qualified marine electronics technician make the adjustments. Inadequate adjustment
can affect performance.
GPS POSITION section
Menu item
[Longitudinal (from
bow]
[Lateral GPS Position
(-Port)]
BOAT INFORMATION section
Menu item
[Boat Length]
[Size of Static Icon]
[Depth Display]
[External Transducer
Draft]
[Keel Draft]
15-4
[HectoPascal], [Millibar], [Millimeter of Mercury], [Inch of Mercury]
[KiloPascal], [Bar], [Pound per Square Inch]
[Gallon] (Gallon & Gallon/Hour), [Litre] (Litre & Litre/Hour)
Restore default settings for the [Units] menu.
Description
Enter the GPS antenna posi-
tioning bow-stern (Longitudi-
nal) and port-starboard
(Lateral) position from the
origin.
Description
Set the length of your boat.
Set the size of static (such as own ship)
icons.
Select the start point for depth measure-
ment. Selection is indicated in the depth
box as "(K)" for [Under Keel] and "(S)"
for [Under Sea Level].
Set the draft external transducers other
than internal fish finder, networked or
multi-beam sonar.
For internal/network transducers, set
the draft from Home screen[Set-
tings][Sounder][Transducer Draft].
For multi-beam sonars, set the draft
from Home screen[Settings][Multi-
beam Sonar][Initial Setup][External
Transducer Draft].
Set the keel draft.
Options
Options (setting range)
0 m to 999 m
-99 m to +9 m
Origin Origin
Options (setting range)
0 (m) to 999 (m)
50 to 150
[Under Keel],
[Under Sea Level]
0.0 (m) to 99.9 (m)
0.0 (m) to 99.9 (m)