Furuno NAVnet TZtouch2 Operator's Manual page 287

12. INSTRUMENT-RELATED DISPLAYS
12.3 Yamaha Engine Status Display
When interfaced with a Yamaha outboard engine(s) compatible with Command Link
and Command Link Plus
the full-screen or quarter screen, dedicated Yamaha engine status displays. There are
two types of displays, the engine combo display, and the boat status display.
Note: The example figures in this section are taken using the full-screen display.
The engine combo display shows critical engine system data, including shift posi-
tion, engine RPM, boat speed, engine trim level, available fuel in gallons, fuel level (up
to six tanks), fuel flow, fuel economy and other vital engine functions such as oil pres-
sure, water pressure and battery voltage.
The boat status display shows provides important information such as trip distance,
speed, fuel flow, fuel economy, gallons used, rudder info, depth, and other informa-
tion.
Yamaha engine information can also be shown on the conventional instrument dis-
play, using the NMEA 2000 PGN sentences 127488 (Engine Parameters, Rapid Up-
date) and 127489 (Engine Parameters, Dynamic).
The information for a maximum of four engines is available. Set the number of engines
and other engine-related information on the [YAMAHA ENGINE SETUP] menu, in the
[Initial Setup] menu. For details, see the NavNet TZtouch2 installation manual.
12.3.1 How to show the display
Add the Yamaha engine status display icon to the home screen (if it has not already
been done), referring to section 1.8.1. Tap the Yamaha engine status display icon on
the home screen to show the display.
12-26
®
, the NavNet TZtouch2 can display engine information on
®