Rezboost; Connecting With Far-15Xx/Far-2Xx7/Far-2Xx8 Series Marine Radars - Furuno NAVnet TZtouch2 Operator's Manual

6. RADAR
6.24

RezBoost

The azimuth resolution of the radar echoes can be switched in the range of 1-2 times,
with one of the following radar sensors: DRS4D-NXT, DRS6A-NXT, DRS12A-NXT or
DRS25A-NXT. Four settings are available, [Standard], [Enhanced1], [Enhanced2], or
[Enhanced 3]. Select [Enhanced 3] for better echo resolution.
1. Open the [Layers] menu.
2. At [RezBoost], select the desired setting.
Standard setting
Conventional radar echoes
Enhanced 2 setting
Sharper than standard by 1.5 times
Equivalent to 2.7° beam width
Operating mode and range
Single range: 0.063 to 72 NM, Target Analyzer
Dual range: 0.063 to 12 NM, Target Analyzer
6.25 Connecting With FAR-15xx/FAR-2xx7/FAR-2xx8
Series Marine Radars
Your NavNet TZTouch2 can connect with the FAR-2xx7 series and FAR-15xx series
Marine Radars.
The following radar type and software version restrictions apply:
• FAR-15xx series: Non IMO-types only with software version 01.19, or later.
6-26
™
Enhanced 1 setting
Sharper than standard by 1.2 times
Equivalent to 3.4° beam width
Enhanced 3 setting
Sharper than standard by 2 times
Equivalent to 2.0° beam width
™
ON, single range: 0.063 to 24 NM
™
ON, dual range: 0.063 to 12 NM