Furuno NAVnet TZtouch2 Operator's Manual page 341

APPENDIX 1 MENU TREE
1
Routes
Default Route Color (Red, Blue, Green, Yellow, Magenta, Orange,
Cyan, Black)
Route Thickness (1 - 10 or 2 -
Routes Density (Low, Medium, Full)
Navigate with Autopilot* (ON, OFF)
Autopilot Step* (2 - 30(°), 10)
Ask to Enter Route Name (ON, OFF)
Fuel Max Range (ON, OFF)
Laylines (ON, OFF)
Route Auto Zoom (ON, OFF)
WPT Switch Mode (Circle and Cross Line, Circle, Cross Line)
Switching Circle Radius (0 - 3278(ft), 200)
Waypoint Crossing Notification (ON, OFF)
End of Route Notification (ON, OFF)
End or Route Operation (Stop Navigation, Continue Navigation)
Intelligent Route Waypoint Centering (ON, OFF)
Display XTE Lines (ON, OFF)
XTE Value (1 - 3278(ft), 200)
Cruising Speed for Planning (0 - 99(kt), 5)
Delete All Points & Routes
Reset Default Settings
Points
Display Points Names (ON, OFF)
Default Point Symbol (Select the default icon for point.)
Default Point Color (Red, Blue, Green, Yellow, Magenta, Orange, Cyan, Black)
Point Size (50 - 200(%), 100)
Icons Set (Modern, Classic)
Points Density Low, Medium, Full)
Data to Be Recorded in Event Comment (None, Date, SST, Date And SST)
Record Event1 Automatically (ON, OFF)
Default Event 1 - 6 Symbol
Event3 Event3
default default
symbol symbol
Event6 Event6
default default
symbol symbol
Default Event 1 - 6 Color
Red
Event1
default
color
Delete All Points & Routes
Delete All Boundaries
Reset Default Settings
1
AP-2
11, 2) (1 - 10=2D mode, 2 - 11=3D mode)
Event2 default symbol Event2 default symbol
Event1 default symbol Event1 default symbol
Blue Green Yellow
Event2 Event3 Event4
default default default
color color color
*Requires NAVpilot.
Event4 default Event4 default
symbol symbol
Event5 default Event5 default
symbol symbol
Purple Orange Light-blue
Event5 Event6
default default
color color
Black