How To Edit A Point On The Screen - Furuno NAVnet TZtouch2 Operator's Manual

4. POINTS, BOUNDARIES
4.7.5

How to edit a point on the screen

1. Tap the point to edit to show the pop-up menu.
2. To change the name of the point, tap [Name] to display the software keyboard.
Change the name as follows:
1) Tap the character to edit.
Delete character selected.
Cursor
Close keyboard
without saving.
2) Tap an alphanumeric character on the software keyboard.
3) Repeat steps 1) and 2) to complete the name. The maximum length of the
name is 20 alphanumeric characters.
4) Tap [] to confirm.
4-10
Point editing tools
Confirm entry.
Clear all characters.
Switch to the numeric
software keyboard.
Shift
Switch to the alphabet
cursor.
software keyboard.