Pentax DSI-200 Series User Manual page 87

Set range
The function code of the bit, ten, hundreds of bits were used to select, analog input AI1,
AI2, AI3 corresponding to the set curve. 3 Each of the five types of curves can be selected
for each analog input.
Curve 1, curve 2, curve 3 are 2-point curve, set in the P4 group function code, and curve
4 and curve 5 are 4-point curve, need to set in the A6 group function code.
AI Below minimum input
P4-34
Set range
The function code is used to set the setting of the analog quantity when the analog input
voltage is less than the set "minimum input".
The function code of the bit, ten, hundred, respectively, corresponding to the analog input
AI1, AI2, AI3.
If the option is 0, when the AI input is lower than the "minimum input", the corresponding
setting of the analog quantity is the curve "minimum input corresponding setting" (P4-14,
P4-19, P4- twenty four).
If 1 is selected, the analog value is set to 0.0% when the AI input is below the minimum
input.
P4-35
P4-36
P4-37
1： curve 1 （2 point， see P4-13～P4-16） 2： curve 2 （2 point，
see P4-18～P4-21）
3： curve 3 （2 point， see P4-23～P4-26） 4： curve 4 （4 point，
see A6-00～A6-07）
5： curve 5（4 point，see A6-08～A6-15）
Ten
Hundred
setting selection
Bit AI1 Below minimum input setting selection
0 ： Corresponds
1：0.0%
Ten
AI2 Below minimum input setting selection（0～1，
hundred AI3 Below minimum input setting selection（0～1，
S1 delay time
Set range
S2 delay time
Set range
S3 delay time
Set range
AI2 curve choose（1～5，same as above）
AI3 curve choose（1～5，same as above）
Factory
value
to the
same as above）
same as above）
Factory
default
0.0s～3600.0s
Factory
default
0.0s～3600.0s
Factory
default
0.0s～3600.0s
- 87 -
000
minimum input
0.0s
0.0s
0.0s
setting