4: General Zone - Honeywell NOTIFIER NCA-2 Instruction Manual

Programming
Press the MORE softkey to display the third ACS label screen.
Soft Keys
ZONE SELECTION: Press to assign the zone label that is to be displayed for the switch group selected.
VIEW: Press to view the associated zone label for the switch group selected.
UP/DOWN: Press to move between switch group selections.
5.6.4 General Zone
This screen displays when a general zone is chosen at the Point Program menu.
Soft Keys
ZONE LABEL: Press to type in a 20-character maximum zone description that will appear in the zone's display messages. The zone
label can referenced in ACS Board programming to assign a label to a switch group.
ACCEPT: Press to save the message and return to the previous screen.
86
A C S B O A R D P R O G R A M M I N G
< - Z O N E S E L E C T I O N
S G 9
S G 1 0
S G 1 1
S G 1 2
S G 1 3
S G 1 4
S G 1 5
S G 1 6
V I E W
Figure 5.48 ACS Label Menu Screen (3)
Z O N E P O I N T P R O G R A M M I N G
Z O N E L A B E L :
Figure 5.49 Zone Point Programming Screen
A 0 1
Z y y y y
NCA-2 Manual — P/N 52482:M5 03/20/2019
Point Program Menu
U P
D O W N
A C C E P T
B A C K
A C C E P T
B A C K