3: Edit Node Label (For A Remote Node); Panel Program Menu - Honeywell NOTIFIER NCA-2 Instruction Manual

Panel Program Menu

Main menu

Program/alter status menu

Node program menu (Remote node selected)

Edit point labels
On NFS2-3030,
this area is used
for the panel's
custom action
message
20 characters
12 characters
5.4.3 Edit Node Label (for a Remote Node)
A node label is designed to give more descriptive information about a node than just its number. This label can be changed in the NCA-
2 if the user has access to this menu. To access this feature, select NODE PROGRAM MENU N____ , enter the desired node number in
the N field, then select EDIT NODE LABEL. Line 4 displays the node number that you will be labeling. Type in a description of up to
40 characters. Press ACCEPT to implement this, or select BACK or <ESC> to exit this screen without making any changes.
Main menu

Program/alter status menu

Node program menu (Remote node selected)

Edit node label
When the screen
comes up, this will
display the current
node label for a
remote node.
Enter the new
label name, and
press ACCEPT to
make the change.
NOTE: To edit the node label for the local NCA-2, see Figure 5.22 on page 67.
5.5 Panel Program Menu
The Program menu options adjust the general operational settings for the local NCA-2: how it communicates over the monitoring net-
work, how it handles events, display settings, password configurations, etc. For example, with EVENT MONITORING you can control
what event types will be monitored. If multiple NCA-2s exist on the network, a user may not want all of them to monitor all types of
events. In this case, one NCA-2 could monitor alarm events, and another one could monitor status events like trouble and enable/disable
events. To bring up a menu, activate the keypad and press the soft key next to the option.
NCA-2 Manual — P/N 52482:M5 03/20/2019
P O I N T : N 0 8 1 L 0 1 D 0 0 1
P O I N T L A B E L : D e t e c t o r L 0 1 D 0 0 1
E X T E N D E D L A B E L :
Figure 5.19 Node Program Menu: Edit Point Labels
E D I T N O D E L A B E L
N O D E L A B E L F O R A R E M O T E N O D E
Figure 5.20 Node Program Menu: Edit Node Label
E D I T L A B E L S
E D I T L A B E L
N O D E : 0 0 3
Programming
U C
A C C E P T
B A C K
A C C E P T
B A C K
65