4: Local And Node History Display - Honeywell NOTIFIER NCA-2 Instruction Manual

The LCD Display
• Highlight an event in the list by moving the cursor with left/right arrows, and press ENTER to bring that event to the top. The list
will then show the events following the event you just placed at the top.
• Output activations are not displayed, but they are put in History if reporting is enabled. This is configured via the
Programming/Alter Status option.
• To switch this screen between USA standard priority and CANADIAN priority in terms of the order of event classes displayed,
select PROGRAM/ALTER STATUS, PROGRAM MENU, SETTINGS. Within an event class, events will be displayed in time
order with the first listed event being the first event received. See Section 5.5.3 "Panel Settings" for more details on the NCA-2
SETTINGS menu.
• Eight events can be displayed on the screen at one time. If the first event is not displayed in the list, a FIRST EVENT soft key
option will be available in the lower left of the screen which will display this first event and the next seven following.
Main menu

Multiple Event List
This is the time
of the event
displayed above it.
Because the FIRST
EVENT option is
present, this event
in the upper-left is
the second event in
the sequence.
This is the
current time.
4.2.4 Local and Node History Display
The History Menu is accessed from the main menu screen by pressing the HISTORY DISPLAY soft key. The NCA-2 will then display
the History Select menu.
Main menu
 History display
NOTE: It is not possible to display or print the history for prealarms or disabled points exclusively.
NCA-2 Manual — P/N 52482:M5 03/20/2019
F I R E A L A R M
D E T E C T O R A D D R 3 2
Z o n e 3
0 9 : 4 6 : 4 4 A T U E J A N 2 2 , 2 0 1 9
2 A L M M O D U L E A D D R 1 M 0 0 1
3 A L M M O D U L E A D D R 1 M 0 0 2
4 A L M D e t e c t o r L 0 1 D 0 4 2
1 S U P M O D U L E A D D R E S S 1 0 1
2 S U P D E T E C T O R A D D R 1 D 0 5 1
1 T B L D E T E C T O R 9 9
1 S E C M o d u l e L 0 9 M 0 0 1
A L A R M : 0 0 0 4
0 9 : 4 8 : 1 0 A T U E J A N 2 2 , 2 0 1 9
F I R S T E V E N T
Figure 4.5 Multiple Event List - Fire Alarms Sample Screen
L O C A L H I S T O R Y
N O D E H I S T O R Y N
B A C K
Figure 4.6 History Select Menu
These node and point labels are programmed into
the NCA-2 (see Section 5 "Programming").
Z 0 0 3
P R E S S A N Y K E Y
S U P E R V I S O R Y : 0 0 0 2
H I S T O R Y S E L E C T
Operation
S M O K E ( P H O T O )
N 2 3 9 L 0 1 D 0 3 2
T R O U B L E : 0 0 0 1
M A I N M E N U
41