Node Program Menu; 1: Node Program Menu Options; 2: Edit Point Labels - Honeywell NOTIFIER NCA-2 Instruction Manual

Programming

5.4 Node Program Menu

The NODE PROGRAM menu is available to make changes to point or node labels.
5.4.1 Node Program Menu Options
Main menu

Program/alter status menu

Node program menu
(Remote node selected)
Main menu

Program/alter status menu

Node program menu
(local NCA selected)
5.4.2 Edit Point Labels
This option allows you to name and/or provide an abbreviated description for individual points.
1. Select the point on the node that you wish to edit, then press the ACCEPT soft key.
2. Once the Edit screen is active, change the point label and/or the extended point label by using the alphanumeric keys to enter the
desired text.
3. Press the ACCEPT key to implement the changes, or BACK to exit without changing anything.
NOTE: Not applicable for changing the label of other network annunciators on the network.
64
E D I T P O I N T L A B E L S
E D I T N O D E L A B E L
Figure 5.17 Node Program Menu, Remote Node Selected
P O I N T L A B E L S E L E C T
P O I N T S E L E C T :
A 0 1
N E X T P O I N T
P R E V I O U S P O I N T
Figure 5.18 Node Program Menu, Local NCA-2 Selected
N O D E P R O G R A M
( A C S B O A R D )
NCA-2 Manual — P/N 52482:M5 03/20/2019
Node Program Menu
B A C K
A C C E P T
B A C K