ION TIGER Select User Manual page 41

•
To lock TigerPC, select the Lock option and enter your password. The default password for
TigerPC is 0000. The password can be changed using the Reset Password button.
•
If you forget your password please contact Ion Science so that a master password can be
issued to you. Master passwords are generated daily and are only valid on the day of
generation.
Lock
The following options are available:
•
Enables a supervisor to disable user access to the functions accessed via the
instrument's soft key B.
•
When connected to a PC, unless it is in
Mode. The instrument will "awaken" when disconnected from the PC.
Zeroing
The following options are available:
•
When selected, the TIGER Select will automatically set its Zero reading based on ambient
air when it is switched on. When deselected the instrument will use its calibration Zero.
•
When selected, TIGER Select uses the fixed calibration Zero. If used in conjunction with
the 'Zero at switch on' option the instrument will Zero at switch on and then remain at that
level.
•
When selected, the Zero level will move negative if cleaner ambient air is detected. This
ensures 0.0 ppm is displayed in clean air and ensures sub ppb levels are always detected.
Zones
Unrivalled Gas Detection.
TIGER Select Instrument User Manual V3.2
TAC Mode, the instrument will go into Sleep
Page 41 of 73
ionscience.com