ION F-SP 12 Quick Start Guide Introduction The ION F-SP 12 Sensor Pod is designed to make The ION range of advanced environmental monitoring environmental monitoring a straight-forward sensors, as well as integration with 3rd party sensors exercise, taking away the hassle of maintaining...
ION F-SP 12 Quick Start Guide Powering Up The F-SP 12 provides two methods of providing The second is through the optional PoE adapter power to the unit. Upon power up, the LCD display through the 10/100 Base-T Ethernet port, which will turn on.
ION F-SP 12 Quick Start Guide Web Portal Once the network details have been confirmed, all further configuration can take place by using the on-board web portal. To connect, from a computer on the same network, head over to the IP address of the sensor pod.
ION F-SP 12 Quick Start Guide Once logged in, the home page of the web portal Each port can also have a custom name, to make will show an overview of all the sensors connected clearer what the sensor is used for. By default, the to the device.
SNMP settings allow configuration of the SNMP Agent an upcoming firmware update, users will have more running on the Sensor Pod. The MIB file running on verbose control over alarm notifications. the SNMP Agent can be downloaded from the settings page, or at the ION website.
ION F-SP 12 Quick Start Guide Firmware Updates ION is constantly making improvements to the Sensor Pod, including the web interface. Any available firmware updates will be located on the ION Website, along with a cross-platform Firmware Upgrade Utility. All rights reserved. Reproduction without permission is prohibited.