Related Manuals for ION MVI
Summary of Contents for ION MVI
- Page 1 Instrument User Manual V2.4 Register your instrument online to receive your extended Warranty. Pioneering Gas Sensing Technology. ionscience.com...
- Page 2 Thank you for purchasing your Ion Science instrument. The standard warranty of your instrument can be extended to up to five years on PhoCheck Tiger and two years on other Ion Science instruments. To receive your extended warranty, you must register your instrument online within one month of purchase (terms and conditions apply.)
-
Page 3: Declaration Of Conformity
Declaration of Conformity The EU Authorised Representative of the manufacturer Ion Science limited has sole responsibility, on the date this product accompanied by this declaration is placed on the market, the product conforms to all technical and regulatory requirements of the... -
Page 4: Table Of Contents
Packing list ................................8 Description ................................. 9 Operating controls ............................10 Battery charging ............................... 12 Recharging ..............................12 Preparing the MVI for use ........................13 Interferences ............................15 User maintenance ..........................16 Filter Replacement............................16 Alarm Level ..............................16 MVI Health Check ............................16 Consumable items.......................... -
Page 5: Statements
Disposal Please dispose of the MVI, its components and any used batteries in accordance with all local and national safety and environmental requirements. This includes the European WEEE (Waste Electrical and Electronic Equipment) Directive. Ion Science Limited offers a take back service. Please contact us for more information. -
Page 6: Legal Notice
"as is" and without any representation, term, condition or warranty of any kind, either express or implied. To the extent permitted by law, Ion Science shall not be liable to any person or entity for any loss or damage which may arise from the use of this manual. -
Page 7: Specification
Audible alarm factory preset to 20 µg/m Datalogger 0-2 volt for use with a datalogger (not supplied) Operation After a short warm up the MVI gives real time indication of Mercury vapour levels through the PTFE probe Pioneering Gas Sensing Technology. Page 7 of 19... -
Page 8: Packing List
Contents should be carefully removed and checked against the packing list. Any discrepancies between the contents and packing list must be reported to Ion Science Limited within 10 days of receipt of shipment. Ion Science cannot be held responsible for shortages not reported within that period. -
Page 9: Description
MVI Instrument User Manual V2.4 Description The Mercury Vapour Indicator (MVI) is a compact, self contained and completely portable instrument which indicates the amounts of Mercury in micrograms/cubic metre. The indicating digital display and carrying handle are mounted on the top cover. A female Luer connector is provided at the end of the instrument to accommodate a dust and water trap filter with PTFE extension probe. -
Page 10: Operating Controls
The ON/OFF switch is located immediately below the display and to the left. In the ON position the MVI will operate and display. In the OFF position, battery power to the MVI is disconnected. The instrument MUST also be switched OFF to enable charging. - Page 11 MVI Instrument User Manual V2.4 Indicating Display This shows the mercury concentration in the monitored environment. Range: 0-2000 µg/m Range: 0-200 µg/m Pioneering Gas Sensing Technology. Page 11 of 19 ionscience.com...
-
Page 12: Battery Charging
Recharging Switch the instrument off. Connect the MVI battery charger to the instrument. Use only the MVI charger supplied with the instrument. Use of an alternative charger may damage the instrument and will void the warranty. The green charging LED lamp located immediately below the ON/OFF switch will light indicating the batteries are accepting charge. -
Page 13: Preparing The Mvi For Use
Only use the Ion Science universal battery charger (Part Number: A-26220) provided with your instrument. • When received as new or after Service by Ion Science or an approved Ion Science Service Centre, your Instrument will arrive fully charged. Do NOT recharge until the “LO BAT” symbol appears. Do not leave connected to the AC power supply unless charging and certainly no more than 16 hours from a low battery message. - Page 14 MVI before adjusting the zero-control knob. Due to the nature of the carbon filter case and the materials used, it can give odours which will show as a small negative reading on the MVI when removed. Preparing the MVI for use The MVI is now ready for use.
-
Page 15: Interferences
There is no measurable interference from carbon monoxide, carbon dioxide or ammonia. A large change in humidity will cause readings of between 5 to 10 µg/m³. The MVI is zeroed at the site of measurement away from sources of mercury to avoid this. -
Page 16: User Maintenance
There are 4 simple tests as detailed below which can be carried out by the user. Prior to testing switch on the MVI and select the 0 to 2000 range. Leave the instrument to stabilise for 10 minutes before proceeding. -
Page 17: Consumable Items
MVI Instrument User Manual V2.4 Test 1: Can the MVI be zeroed? Zero the MVI in clean air (do not use the charcoal filter). Can the MVI be zeroed? If not, then a service is required. If yes, then continue. -
Page 18: Manual Log
Disclaimer: Information in this [manual, document…] is subject to change without notice and does not represent a commitment on the part of Ion Science. No claims, promises or guarantees are made about the accuracy, completeness, or adequacy of the information contained herein. -
Page 19: Contact Ion Science Limited
Contact Ion Science Limited ION Science Ltd – UK/Head Office Tel: +44 (0)1763 208 503 Web: www.ionscience.com Email: info@ionscience.com ISM ION Science Messtechnik – Germany Office Tel: +49 (0) 2104 1448-0 Web: https://www.ism-d.de/en/ Email: sales@ism-d.de ION Science India - India Office...