Select The Gas; Set Alarm Levels - ION TIGER Select User Manual

TIGER Select instruments leave the factory with their Rechargeable Battery Pack
fully charged. However, prolonged periods of storage may result in the
Rechargeable Battery Pack discharging. We recommend charging the instrument
for seven hours before first use.
A non-rechargeable AA Battery Pack can also be used, but it is recommended that it only be used if
no power is available to recharge the Rechargeable Battery Pack.
For further details of Battery Packs and recharging, refer to Batteries.

Select the Gas

Next, ensure that the instrument is set to detect the correct gas. This is displayed on the main
running screen above the current measurement units.
If necessary, change the selected gas. This can be done
TIGER Select instruments leave ION Science Ltd pre-set to monitor gas type TAC.
Instruments are factory calibrated against isobutylene and all response factors are
equivalent to this.

Set Alarm Levels

We recommend that alarm levels are set to user specifications as soon as possible before the TIGER
Select is first used. See
Unrivalled Gas Detection.
Alarms for details.
Page 16 of 73
TIGER Select Instrument User Manual V3.2
using TigerPC, or using the instrument.
ionscience.com