Table of Contents
Advertisement
Zeroing
Pressing the Zero soft key presents two Zero options
select them. The upper symbol represents an absolute Zero. The lower symbol represents a relative
Zero, which follows the drift of the MiniPID 2 Sensor.
The screen displays a tick '✓' to confirm your selection. If the relative Zero has been selected, TIGER
Select will then Zero itself.
Peak Hold
Press the Peak Hold soft key to display the peak reading:
screen, updating as the current peak reading changes. Press the Reset soft key to reset the peak
value. Press Esc to cancel.
Information
Pressing the Information soft key provides access to a list of screens which display the current
settings of the TIGER Select. Use the Up and Down keys to scroll through the list and press Enter to
view a screen. Press Esc to return to the main running screen.
First screen
Gas selected
Response Factor
Upper alarm
Lower alarm
Second screen
Lamp selected
Date of Factory Calibration
Date of Custom Calibration
Third screen
SPAN 1
SPAN 2
PID live response
MiniPID 2 Sensor A/D reading
Fourth screen
Short Term Exposure Levels
Time Weighted Average
Internal Reference Number
Firmware version
Bootloader version
Battery type and voltage
Unrivalled Gas
Detection.
TIGER Select Instrument User Manual V3.2
Page 22 of 73
. Use the Up or Down keys to
. This reading will stay on
ionscience.com
Advertisement
Table of Contents
