Lamp
The TIGER Select is configured for use with the 10.0eV Lamp only.
TIGER Select
Used to configure the settings exclusive to TIGER Select:
•
Temperature units
•
Gas selection
•
SPAN 1 range
•
The mode of operation the TIGER Select starts in:
o Basic: Always start in Basic Start-up Mode
o Adv: Always start in Advanced Start-up Mode
o Ask: Instrument "asks" the user during start-up
Calibration
Select the calibration gas using the drop-down list.
If no gases are shown in the drop-down list, click Browse and go to the location where the TigerPC
software files are saved:
<Installation folder>/IonScience/Tiger/software/instruments/<instrument number>/gas table
Find the appropriate gas table and open it.
Unrivalled Gas
Detection.
TIGER Select Instrument User Manual V3.2
Page 39 of 73
ionscience.com