ION TIGER Select User Manual page 25

Hide thumbs Also See for TIGER Select:
Table of Contents

Advertisement

Zones
Press the Zone soft key to display the name of the currently selected Zone:
TIGER Select default is
zones.
Data Logging: Single-log (push-to-log)
Only available if the relevant
Press the Single Data Log soft key to take a single data log reading. The Single Data Log symbol
appears briefly with a tick:
Data Log soft key again to take another reading. The memory status icon flashes when a Single-log is
taken.
Data Logging: Multi-logging
Only available if the relevant
Pressing the Multi Data Log soft key results in the Multi-logging symbol appearing with a question
mark:
setup. A tick '✓' briefly appears beside the question mark to confirm that Data Logging has started.
The memory status icon flashes once per second while continuous Data Logging is in progress.
To stop Data Logging, press the soft key again. A crossed-out data log symbol is then displayed next
to a question mark. Press the Enter key to confirm the action. A tick '✓' then appears beside the
question mark, confirming that Data Logging has stopped.
Sleep Mode
Press and hold the Zzz soft key to send the TIGER Select to "sleep". A three second count down takes
place before it enters Sleep Mode. All functionality is switched off. "Zzz" is displayed on screen. Press
Esc to cancel.
If set to do so in TigerPC, the instrument can also enter Sleep Mode during data logging when the
duration between logs exceeds two minutes, and automatically when connected to a PC.
Stealth Mode
By default, this option is not available via either soft key. Assign it to a soft key menu
When selected, all audible and visual alarms are disabled except for the alarm indicator on the
screen. This function may help avoid triggering panic in public places.
Unrivalled Gas
Detection.
'001'. Zones are set up in
upgrade has been
upgrade has been
. Press the Enter key to start the Data Logging process based on
Page 25 of 73
TIGER Select Instrument User Manual V3.2
TigerPC. Use the Up and Down keys to select other
installed.
before returning to the main screen. Press the Single
installed.
. The
TigerPC
using
TigerPC.
ionscience.com

Advertisement

Table of Contents
loading

Table of Contents