Related Manuals for ION FirstCheck+ 1000
Summary of Contents for ION FirstCheck+ 1000
- Page 1 FirstCheck+ 1000, 2000, 3000 & 5000 User Manual V1.6 Part Number 820256 www.ionscience.com...
- Page 2 FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td Page 1 of 53...
-
Page 3: Declaration Of Conformity
BS EN 13980:2002 Potentially Explosive Atmospheres Application of Quality Systems On behalf of Ion Science Ltd, I declare that, on the date this product accompanied by this declaration is placed on the market, the product conforms to all technical and regulatory requirements of the above listed directives. -
Page 4: Table Of Contents
FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td Contents Page Declaration of Conformity . ATEX intrinsic safety ratings EMC Emissions and Immunity Statements Responsibility for use Warnings Caution . Quality Assurance Disposal Calibration Facility Ion Science Contact Details Introduction to FirstCheck+. - Page 5 FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td Contents Page VOC Gas Selection LEL Gas Selection Unit Selector Cycle Screens . Data Log Memory Alarm . Application (Health & Safety). . Application (Survey) Security .
-
Page 6: Statements
NOTE: Ion Science Ltd can accept no responsibility for the incorrect adjustment of features that cause harm or damage to persons or property. FirstCheck+ can be used as a personal safety device. It is the user s responsibility to respond appropriately to an alarm situation. -
Page 7: Quality Assurance
UK national standards. A FirstCheck+ Calibration Kit is available from Ion Science to allow a two-point calibration to be carried out in the field as a custom calibration. However, Ion Scienc e does recommend the annual return of all instruments for a yearly service and calibration. -
Page 8: Introduction To Firstcheck
The FirstCheck+ range are fully upgradeable i n the field, purchasing a simple upgrade key can convert a FirstCheck+ 1000 to a 5000 or a 2000 to a 3000 or any oth er combination. FirstCheck+ has two principle modes of operation, Health & Safety and Survey mode. -
Page 9: Getting Started
To avoid drawing dust or particulate matter into the detector cell we suggest always fitting the filter with the Ion Science logo facing away from the instrument, therefore dust only collects on the same one si de of the filter and is not inadvertently drawn into the instrument if the filter is attached the other way round. -
Page 10: Setting Alarm Levels
Setting date and time Ion Science Ltd recommends that the correct local date and time be set to the instrument as soon as possible before using for the first time (see page 32 for d etails on how to set the date and time.) Selecting a gas from the inte rnal gas table The Factory calibration is carried out on FirstCheck+ just before leaving Ion Science. -
Page 11: Instrument Functions
FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td Instrument Functions _____ Keypad function descriptions ON/OFF To switch the FirstCheck+ instrument 'ON' - Press the 'ON/OFF' key. To switch the FirstCheck+ instrument 'OFF' Firstly, ensure you are on the DISPLAY/FUNCTION Selection screen, or a DISPLAY screen. -
Page 12: How The Firstcheck+ Menu Works
FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td Instrument Functions _____ How the FirstCheck+ Menu Works Once in the function menu with the function -symbol you require on screen, press the ENTER key. (See Figure 1.) -
Page 13: Instrument Functions
FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td Instrument Functions _____ Display/Function Selection (P 13) Viewing Screens (P 14 & 15) Zone Select (P 16) Data Transfer (P 16) Selection (P 21) Alarm... -
Page 14: Quick Reference
FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td Quick Reference _____ This quick reference indicates basic instrument functionality, many other functions can be adjusted or selected via FirstCheck+'s PC software (1 PC). 1 = FirstCheck+ 1000... -
Page 15: Instrument Displays
FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td Instrument Displays _____ DISPLAY/FUNCTION Selection Screen The DISPLAY/FUNCTION selection screen is shown when the FirstCheck+ is first switched on, and can always be located by repeatedly pressing the 'Esc' (Escape) key. The DISPLAY/FUNCTION screen allows the user to view gas levels in a variety of ways and also allows access to the Function menu where settings can be adjusted. -
Page 16: Graph Screen
FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td Instrument Displays _________ Relative Background Zero Reference Absolute When in Survey mode, pressing the ZERO key alternates between 'Relative' and 'Absolute' modes. There is a constant level of detectable gas in ambient air, w hich is detectable with FirstCheck+. -
Page 17: Large Number Screen
FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td Instrument Displays _________________________ ___ Large Number Screen Enables the viewing of real-time measurements in large numerical format for easy viewing in difficult conditions. Additional information such as alarm levels, battery status and a peak hold readi ng can be viewed by pressing and holding the ENTER key. -
Page 18: Instrument Menu
FirstCheck+ instrument. Once a Zone is selected on the instrument, all data files will include that Zone name in the files header detail. To avoid long download times Ion Science recommends downloading data on a daily basis. The FirstChe ck+ has a default Zone called Zone 0. Unless specified, all readings will automatically be stored in this Zone. -
Page 19: Alarm
Key Press: The instrument 'Beeps' when any key on the keypad is pressed when this opti Alarm: This feature has the ability of switching off the alarm sound. For safety reason Ion Science Ltd suggests this function is never switched off unless there are specific reasons for not wanting to silence the alarms. -
Page 20: Calibration
Custom General description Due to the linear output of the Ion Science PID detector cell, FirstCheck+ instruments only require a two- point calibration. The FirstCheck+ scales its linear output across a 'Zero' level (clean air reference) and the 'Span' (a user defined gas concentration). - Page 21 NOTE: Pressing the ENTER key allows the user to select which part of the calibration routine is carried out. Ion Science also suggest carrying out the calibration in the following sequence: - ZERO - Zero's the PID, H2S, CO and LEL sensors and sets the span of the LEL sensor.
- Page 22 If you have chosen a mix this will be available on screen or a combination of both. Ion Science recommends that if you are using single gases to calibrate the sensors then it is done in the following order: VOC, LEL, CO then the H S and the O calibrated automatically with the ZERO.
-
Page 23: Back-Light
WARNING!: Ion Science makes every effort to ensure the gas tables held within the FirstCheck+ memory and supplied on CD are accurate at the time of manufacture. In critical applications alarm levels must be checked, compared and adjusted to local legislation before use. -
Page 24: Lel Gas Selection
WARNING: Ion Science makes every effort to ensure the gas tables held within the FirstCheck+ memory and supplied on CD are accurate at the time of manufacture. In critical applications alarm levels must be checked, compared and adjusted to local legislation before use. -
Page 25: Unit Selector
FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td Instrument Menu _____ Unit Selector (1, 2, 3 & 5) The FirstCheck+ photo-ionisation detector can be selected to measure VOC's in either ppm (Parts per million, by volume), ppb (Parts per billion) or mg/m (Milligrams per cubic meter). -
Page 26: Application (Health & Safety)
FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td Instrument Menu _____ Application - Health & Safety Mode (3 & 5) Modes of operation are selected to suit how the instrument is being used. Health & S a fety mode is used to check for conformity of short-term exposure levels (STEL) or time -weighted averages (TWA) that are specific for particular hazardous environments (for example EH40 in the UK and OSHA in the USA). -
Page 27: 1Stpc Software
Before connecting your FirstCheck+ to a PC for the first time, check that the PC s IRDA works correctly with another device. Installation of 1stPC Software Insert Ion Science software CD into your CD rom drive The CD will automatically start up Click on the Download Software button The FirstCheck+ setup wizard will start. -
Page 28: Connection
FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td 1stPC Software Features __________ Connecting FirstCheck+ with a PC Switch on your FirstCheck+ instrument, enter the FUNCTION MENU and select the DATA TRANSFER symbol by pressing the ENTER key. When communicating with a computer the FirstCheck+ displays a ' ü' within the data transfer symbol. -
Page 29: 1Stpc Software Features
FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td 1stPC Software Features ______________ 1stPC software has many features allowing the transfer for data and function specifications to and from the instrument and the PC. -
Page 30: File
FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td The instrument has 8Mb of memory, which is divided into 1Mb segments. When a segment becomes full, data is then stored in the next segment. -
Page 31: Data
FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td 1stPC Software Features __________________ Data Data logged information can be cleared from your instrument or downloaded from the instrument to your PC. Once downloaded to your PC, files can be saved for future reference and exported as CSV files. -
Page 32: Instrument
An instrument upgrade allows you to upgrade your instrument to other FirstCheck+ variants with advanced features, once you have purchased the pass code from Ion Science. A Firmware upgrade allows you to upgrade your actual instrument software directly, should an upgrade be made available. -
Page 33: Lamp
FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td 1stPC Software Features __________ Lamp Enables the selection of different l a mp types you may have purchased to use with your instrument. Application Enables the selection and de-selection of Health & Safety mode and the selection of ppm, ppb or mg/m . -
Page 34: Backlight
FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td 1stPC Software __________ Backlight Gives you the option of turning the back light on or off permanently, or setting it on a timer after every key press. -
Page 35: Zones
FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td 1stPC Software _______________ Calibration The calibration settings can also be adjusted under the Menu Settings and uses the same layout as described on page 28. -
Page 36: Software Disclaimers
Ion Science Ltd have been advised of that pur pose. Furthermo re Ion Science Ltd does not warrant , guarantee, or make any representation regarding the use, or the results of the use, of the SOFTWARE or written materials in terms of correctness, accuracy, reliability, current revision, or otherwise. - Page 37 Science Ltd discretion, to either (a) return of payment as evidenced by a copy of the Receipt, or (b) replacement of the disk that does not meet Ion Science Ltd limited warranty and which is returned to Ion Science Ltd with a copy of the Receipt. If failure of the disk has resulted from accident, abuse, or misapplication, Ion Science Ltd will have no responsibility to either replace the disc or refund payment.
-
Page 38: Batteries
For Intrinsic Safety of T4 rating and reduced risk of explosion you must only use Duracell Standard, Procell Alkaline, Zinc Carbon R6, R6B, R6PP or an ION SCIENCE APPROVED battery pack. DO NOT mix old / used batteries or batteries from different manufacturers. - Page 39 FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td Batteries Replacement of Non-rechargeable batteries 1. Ensure the FirstCheck+ is switched Off. 2. Using the battery cover removal tool provided, remove the battery cover at the rear of the instrument casing.
-
Page 40: Diagnostics
FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td Diagnostics Basic faults or diagnostics are presented as symbols with a more detailed description of the fault indicated by the number in the top right hand corner of the display. Shoul d a fault occur, correct the issue and then press ENTER or ESC to clear the fault message. - Page 41 FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td Diagnostics _____ Sensor 1. Detector cell fuse failure If the error persists return the instrument to the manufacturer. 2. Contaminated detector cell If the FirstCheck+ is used without its filter or filters are not replaced on a regular basis, particles of dust or dirt can cause a range of effects.
- Page 42 FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td Diagnostics ______ Clock The internal clock has failed. Return the instrument to the manufacturer. Delay This symbol will appear during the manual adjustment and selection of functions of the instrument.
-
Page 43: Maintenance
FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td Maintenance ______ 1. Keep the PID detector lamp window clean. 2. Replace the sample filters on a regular basis. Frequency of cleaning the detector lamp and replacement of the filter depends on the type of gas being detected and the quality of the backgr ound air (see page 49 for details of parts expected life time.) - Page 44 1. The vial of cleaning compound contains Aluminium Oxide as a very fine power (CAS Number 1344 - 28- 1). A full material safety data sheet MSDS is available on request from Ion science ltd. The key issues are listed below: Hazard identification: ·...
- Page 45 FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td Maintenance ____ 5. Remove the residual powder with a clean cotton bud. Care must be taken not to touch the tips of cotton buds that are to be used to cle an the lamps as this may contaminate them with finger oil.
-
Page 46: Accessories
Ion Scie nce Lt d Ion Science L td Accessories _____ Ion Science Ltd has developed an exclusive range of high quality accessories to compliment the F i rstCheck+. Please see a selection of these below. Part Number Accessory Description... -
Page 47: Is Protective Cover Instructions
Protective / Decontamination Cover General Description This unique accessory enhances the base intrinsically safe approval of Ion Science instruments, including FirstCheck and PhoCheck, from category 2 (Zone 1) to category 1 (Zone 0) classification. The cover also increases instrument's ingress protection rating to IP66 allowing the instruments to be used in applications where the instruments are likely to get wet such as arson investigation, emergency response and in heavy rainfall. - Page 48 FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td Protective / Decontamination Cover Fitting Instructions Insert instrument into the IS protective cover ensuring that the probe tip exits through the small slit at the top of the cover and that the cover labelling and stickers are on the reverse of the instrument.
-
Page 49: Upgrade Options
FirstCheck+ range with additional and advanced features. This change can simply be achieved by contacting Ion Science for a quote and placing an order . We will supply you with a unique security key code for your specific instrument which can be downloaded to the instrument via the Ion PC software... -
Page 50: Service Options
Service Options ______ Ion Science is pleased to offer a number of service options on our FirstCheck+ product range. The options below allow you to choose the cover provided for your instrument that best suits your needs. At Ion Science we recommend t hat all of our gas detection instruments be returned for recalibration on an annual basis to ensure optimal performance. -
Page 51: Technical Specification
1 ppb - 10,000 ppm (FirstCheck+ 5000 ) T90 < 1 second 0.1 ppm 10,000 ppm (FirstCheck+ 3000) 0.1 ppm 4,000 ppm (FirstCheck+ 1000 and 2000) - Electrochemical 0 to 28% T90 < 10 seconds CO - Electrochemical 0.1 - 1000 ppm T90 <... - Page 52 FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td Technical Specifications ___________ Expected lifetime of parts Batteries On the condition of normal use battery capacity will be reduced to approximately 70% after 250 full battery cycles or 1 year (whichever comes first).
- Page 53 FirstCheck+ 1, 2, 3 & 5000 Ion Scie nce Lt d Ion Science L td Update Log Manual Version Amendment Date Updated Instrument Firmware PC Software FirstCheck+ Add Is Protective Cover details 18/06/08 V2.04 V1.2 to manual save as new manual V1.3...