Port-Based Vlan Setup - ZyXEL Communications GS1920v2 Series User Manual

8/24/48-port gbe smart managed switch
Hide thumbs Also See for GS1920v2 Series:
Table of Contents

Advertisement

Advanced Application > VLAN > VLAN Configuration > MAC Based VLAN Setup
Fig ure 95
The following table describes the fields in the above screen.
Table 43 Advanced Application > VLAN > VLAN Configuration > MAC Based VLAN Setup
L ABEL
Name
MAC Address
VID
Priority
Add
Cancel
Index
Name
MAC Address
VID
Priority
Delete
Cancel
9.10 Po rt- Ba se d VL AN Se tup
Port-based VLANs are VLANs where the packet forwarding decision is based on the destination MAC
address and its associated port.
Port-based VLANs require allowed outgoing ports to be defined for each port. Therefore, if you wish to
allow two subscriber ports to talk to each other, for example, between conference rooms in a hotel, you
must define the egress (an egress port is an outgoing port, that is, a port through which a data packet
leaves) for both ports.
Chapter 9 VLAN
DESC RIPT IO N
Type a name up to 32 alpha numeric characters for the MAC-based VLAN entry.
Type a MAC address that is bind to the MAC-based VLAN entry. This is the source MAC
address of the data packet that is looked up when untagged packets arrive at the Switch.
Type an ID (from 1 to 4094) for the VLAN ID that is associated with the MAC-based VLAN
entry.
Type a priority (0-7) for the MAC-based VLAN entry.The higher the numeric value you assign,
the higher the priority for this MAC-based VLAN entry.
Click
to save the new MAC-based VLAN entry.
Add
Click
to clear the fields in the MAC-based VLAN entry.
C a nc e l
This field displays the index number of the MAC-based VLAN entry.
This field displays the name of the MAC-based VLAN entry.
This field displays the source MAC address that is bind to the MAC-based VLAN entry.
This field displays the VLAN ID of the MAC-based VLAN entry.
This field displays the priority level of the MAC-based VLAN entry.
Select an entry's check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Click
to remove the selected entry from the summary table.
De le te
Click
to clear the check boxes.
C a nc e l
GS1920v2 Series User's Guide
122

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents