The Status Screen - ZyXEL Communications GS1920v2 Series User Manual

Table 5 Web Configurator: Password/SNMP (continued)
L ABEL
Set Community
Trap Community
Apply
Cancel
4.3 T he Sta tus Sc re e n
The screen is the first screen that displays when you access the web configurator.
Sta tus
This guide uses PoE model(s) screens as an example. The screens may very slightly for different models.
The following figure shows the navigating components of a web configurator screen.
Web Configurator Home Screen for PoE model(s) (Status)
Fig ure 32
A
- Click the menu items to open submenu links, and then click on a submenu link to open the screen in
A
the main window.
Chapter 4 The Web Configurator
DESC RIPT IO N
Enter the string, which is the password for the incoming Set- requests from the
Se t C o m m unity
management station.
The string is only used by SNMP managers using SNMP version 2c or lower.
Se t C o m m unity
Enter the string, which is the password sent with each trap to the SNMP
T ra p C o m m unity
manager.
The string is only used by SNMP managers using SNMP version 2c or lower.
T ra p C o m m unity
Click to save your changes to the Switch's run-time memory. The Switch loses these
Apply
changes if it is turned off or loses power, so use the
save your changes to the non-volatile memory when you are done configuring.
Click to begin configuring this screen afresh.
C a nc e l
GS1920v2 Series User's Guide
Sa ve
B
C
48
link on the top navigation panel to
E
D F
G
H