Zyxel One Network (Zon) Utility; Requirements - ZyXEL Communications GS1920v2 Series User Manual

Table 9 Status (continued)
L ABEL
Hybrid Mode
Cloud Control
Status
PoE Usage
Detail
IP Address Information
IPv4 Address
Subnet Mask
Default
Gateway
IP Setup
IPV6 Global
Unicast Address
IPV6 Link-Local
Address
IPv6
configuration
Device Status
and Quick
Configuration
Quick Links
7.3 Zyxe l O ne Ne two rk (ZO N) Utility
ZON Utility is a program designed to help you deploy and manage a network more efficiently. It detects
devices automatically and allows you to do basic settings on devices in the network without having to
be near it.
The ZON Utility issues requests via Zyxel Discovery Protocol (ZDP) and in response to the query, the device
responds back with basic information including IP address, firmware version, location, system and model
name in the same broadcast domain. The information is then displayed in the ZON Utility screen and you
can perform tasks like basic configuration of the devices and batch firmware upgrade in it. You can
download the ZON Utility at www.zyxel.com and install it on a PC (Windows operating system).
7.3.1 Re q uire m e nts
Before installing the ZON Utility on your PC, please make sure it meets the requirements listed below.
Chapter 7 Status and ZON
DESC RIPT IO N
This field displays whether the Switch is in
you can see a link to a QR code to register the Switch to use NCC (Nebula Control Center).
This field displays the registration and connection status between the Switch and the NCC
(Nebula Control Center). See
In mode, the status will display
sta nda lo ne
status will display
C o nne c te d
- The Switch is registered with and connected to the NCC.
C o nne c te d
The Switch is not connected to the NCC.
Disc o nne c te d -
- The Switch is not registered with the NCC.
Unre g iste re d
This field displays the amount of power the Switch is currently supplying to the connected PoE-
enabled devices.
Click this link to go to the
Ba sic Se tting > Syste m Info
such as system resource usage and the Switch temperature, fan speeds or voltage.
This field displays the Switch's current IPv4 address.
This field displays the Switch's subnet mask.
This field displays the IP address of the Switch's default gateway.
Click the link to go to the
Ba sic Se tting > IP Se tup
This field displays the Switch's IPv6 global unicast address
This field displays the Switch's IPv6 link-local address.
Click the link to go to the
Ba sic Se tting > IPv6
This section shows whether a feature is enabled or not on the Switch. You can click a feature's
link to go to the configuration screen for the feature.
Se tting
Hover your cursor over a red exclamation mark to display information about the feature.
This section provides the shortcut link to a specific configuration screen.
GS1920v2 Series User's Guide
mode or
sta nda lo ne
Section 3.3 on page 40 for more information on the Cloud LED.
Disc o nne c te d
or .
Disc o nne c te d
screen to check other detailed information,
screen.
screen.
70
mode. In
c lo ud sta nda lo ne
or . In mode the
Unre g iste re d c lo ud
mode