Port Status; C Ha Pte R 50 Po Rt Sta Tus; Overview - ZyXEL Communications GS1920v2 Series User Manual

50.1 O ve rvie w
This chapter introduces the port status screens.
50.2 Po rt Sta tus
This screen displays a port statistical summary with links to each port showing statistical details. To view
the port statistics, click
section of the
L inks
Ma na g e m e nt
Fig ure 286
The following table describes the labels in this screen.
Table 195 Port Status
L ABEL
Port
Name
Link
in all web configurator screens and then the
Sta tus
screen to display the
Sta tus
> to see the following screen.
Po rt Sta tus
Port Status (for PoE model(s))
DESC RIPT IO N
This identifies the Ethernet port. Click a port number to display the
Figure 287 on page 394).
This is the name you assigned to this port in the
This field displays the speed (either
for 10 Gbps) and the duplex (
10G
( or ) for the combo ports. This field displays
C o ppe r Fib e r
device.
GS1920v2 Series User's Guide
C
HA PTER
Po rt Sta tus
screen as shown next. You can also click
Po rt Sta tus
Ba sic Se tting
for 10Mbps,
10M 100M
for full duplex or for half). It also shows the cable type
F H
Do wn
392
5 0
link in the
Po rt Sta tus
screen (refer to
Po rt De ta ils
> screen.
Po rt Se tup
for 100Mbps, for 1000Mbps, or
1000M
if the port is not connected to any
Q uic k