Configuring Protocol Based Vlan - ZyXEL Communications GS1920v2 Series User Manual

9.7.1 C o nfig uring Pro to c o l Ba se d VL AN
Click the
Pro to c o l Ba se d VL AN Se tup
screen as shown.
Note: Protocol-based VLAN applies to un-tagged packets and is applicable only when you
use IEEE 802.1Q tagged VLAN.
Advanced Application > VLAN > VLAN Configuration > Protocol Based VLAN Setup
Fig ure 93
Note:
The following table describes the labels in this screen.
Table 41 Advanced Application > VLAN > VLAN Configuration > Protocol Based VLAN Setup
L ABEL
Active
Port
Name
Ethernet-type
VID
Priority
Add
Cancel
Index
Active
Chapter 9 VLAN
link in the
DESC RIPT IO N
Check this box to activate this protocol based VLAN.
Type a port to be included in this protocol based VLAN.
This port must belong to a static VLAN in order to participate in a protocol based VLAN. See
Chapter 9 on page 107 for more details on setting up VLANs.
Enter up to 32 alpha numeric characters to identify this protocol based VLAN.
Use the drop down list box to select a predefined protocol to be included in this protocol based
VLAN or select and type the protocol number in hexadecimal notation. For example the IP
O the rs
protocol in hexadecimal notation is 0800, and Novell IPX protocol is 8137.
Note: Protocols in the hexadecimal number range of 0x0000 to 0x05ff are not allowed
to be used for protocol based VLANs.
Enter the ID of a VLAN to which the port belongs. This must be an existing VLAN which you defined
in the
Adva nc e d Applic a tio ns
Select the priority level that the Switch will assign to frames belonging to this VLAN.
Click to save your changes to the Switch's run-time memory. The Switch loses these changes
Add
if it is turned off or loses power, so use the
changes to the non-volatile memory when you are done configuring.
Click to begin configuring this screen afresh.
C a nc e l
This is the index number identifying this protocol based VLAN. Click on any of these numbers to
edit an existing protocol based VLAN.
This field shows whether the protocol based VLAN is active or not.
GS1920v2 Series User's Guide
screen to display the configuration
VL AN C o nfig ura tio n
> screens.
VL AN
link on the top navigation panel to save your
Sa ve
119