Isl Maintenance Tools; Maintenance Commands - Avaya CS 1000 Maintenance Manual

1.5 Mb ISL maintenance
Command
STAT SERV (N)

ISL maintenance tools

Maintenance commands

Table 60: D-channel commands (LD 96)
important ISL commands.
Warning:
Ensure that other TTYs and D-channels residing on the NTAK02 are disabled.
Important:
Extreme care must be taken when enabling D-channel message monitoring option due to
the possible heavy volume of messages during normal traffic. Use this command only during
very light or no traffic conditions for trouble-shooting purposes. Remember to disable the
monitoring tool when you are finished.
The port (TTY) performing the monitoring must have MTTC programmed.
Table 60: D-channel commands (LD 96)
Command
DIS DCH N
DIS MSGI N
DIS MSGO N
DIS AUTO ON
ENL AUTO ON
ENL DCH N
ENL MSGI N
ENL MSGO N
EST DCH N
PLOG DCHI N
RLS DCH N
126 ISDN Primary Rate Interface Maintenance
Displays the current service and service acknowledge
message SERV setting for individual DCH N or DCH.
on page 126 provides a quick reference list of
Disable DCHI port N.
Disable incoming D-channel messages on link N *.
Disable outgoing D-channel messages on link N *.
Disable the D-channel.
Auto enable the D-channel after SYSLOAD.
Enable DCHI port N.
Enable incoming D-channel messages on link N *.
Enable outgoing D-channel messages on link N *.
Establish D-channel N.
Print D-channel statistics log N.
Release D-channel N.
Comments? infodev@avaya.com
Description
Action
November 2011