Avaya CS 1000 Maintenance Manual page 26

Quick reference to PRI operations
DIS DCH x
DIS MSGI x (options)
DIS MSGI x FEAT CPNW
DIS MSGO x (options)
DIS MSGO x FEAT CPNW
DIS SERV x
DLIF DCH x
ENL AUTO x
ENL DCH x (FDL)
ENL MSGI x (options)
ENL MSGI x FEAT CPNW
ENL MSGO x (options)
ENL MSGO x FEAT CPNW
ENL SERV x
EST DCH x
EST ISPC l ch (N)
FDIS NCAL <DCH#> <conn_ID>
PLOG DCH x
RLS DCH x
RLS ISPC l ch
RST DCH x
RST MON
SDCH DCH x
26 ISDN Primary Rate Interface Maintenance
Command
Comments? infodev@avaya.com
Action
Disable DCH x.
Disable the monitoring of incoming messages on D-
channel x.
Disable incoming monitoring for the Network CPNW
ISDN messages on D Channel x.
Disable the monitoring of outgoing messages on D-
channel x.
Disable outgoing monitoring for the Network CPNW
ISDN messages on D Channel x.
Disable service messages on D-channel x.
Force download of D channel x (For PRI UIPE
application).
Enable automatic recovery for DCH x.
Enable DCH x and attempt to establish the link, and
force download to MSDL.
Enable the monitoring of incoming messages on D-
channel x.
Enable incoming monitoring for the Network CPNW
ISDN messages on D Channel x.
Enable the monitoring of outgoing messages on D-
channel x.
Enable outgoing monitoring for the Network CPNW
ISDN messages on D Channel x.
Enable service messages on D-channel x.
Establish multiple frame operation on D-channel x.
Start the data interface establishment process at the
ISPC slave side an ISPC link (where "N" = the "number
of tries" counter).
Force-disconnect the specified call-independent
connection.
Print protocol error log on DCH x.
Release D-channel x.
Stop the data interface establishment process.
Reset D-channel x, inhibit signaling.
Reset or reactivate monitoring on D-channels with
enabled monitors.
Switch to the standby D-channel x.
November 2011