Table of Contents
Advertisement
You can click the [Download] to get a log of the target drive, and then save it
using any file name. It takes about one minute to get a log. While a log is being
obtained, do not move to another screen until the log is completely saved. Note
that you cannot obtain logs for two or more drives at the same time.
Cleaning Status
This shows the time and result of the latest cleaning. By clicking [View Log],
you can see a history of the past cleaning results.
If you want to perform cleaning manually, select the check box of each drive,
and then click [Drive Cleaning]. It takes about one minute to clean each drive.
When you perform cleaning, if a drive is still in use, an error occurs. Therefore,
wait until a drive is not used and then start cleaning.
Command button
Function
Download
Gets a log of the target drive.
Drive Cleaning
Performs cleaning the specific drive.
Refresh
Refreshes the information on the screen.
Chapter 3 Using the Web Administration Screen
50
Advertisement
Table of Contents
