Table of Contents
Advertisement
NTP Configuration (Optional)
[Setup] Menu
Software Configuration
2
Click [Change network settings].
Notes
• The [Local Network] fields cannot be changed.
• If you change the IP address, make sure you access the web administration
screen again using the new IP address (page 14).
• If you set an incorrect IP address, you may not be able to access it.
When changing it, be very careful.
From the [NTP Configuration] screen, you can set whether or not the NTP
(Network Time Protocol) server performs time synchronization.
NTP Enable
• Enabled : NTP server performs time synchronization
• Disabled : NTP server does not perform time synchronization
NTP Server IP Address
Input the IP address of the NTP server.
Clicking the [Apply] button applies your settings.
From the [Setup] menu, you can configure software settings.
Maintenance and the [Software Configuration] screen
This system automatically performs the following maintenance once each day.
• Log file consolidation
• Tape volume verification
• Tape volume compaction
• File system maintenance
• System area backup to AIT cartridge (Full backup)
Chapter 3 Using the Web Administration Screen
26
Advertisement
Table of Contents
