Table of Contents
Advertisement
Drive
Command button
From the [Monitor] screen, you can use the following commands.
Command button
Function
Automatic Refresh
Refreshes the screen automatically every 5
(every 5 minutes)
minutes.When you click this button, the display changes
to [No Automatic Refresh]. While automatic refresh is in
progress, the display indicates [No Automatic Refresh].
No Automatic Refresh
Stops the screen from being refreshed
automatically.When you click this button, the display
changes to [Automatic Refresh (every 5 minutes)]. While
automatic refresh is stopped, the display indicates
[Automatic Refresh].
Refresh
Refreshes the information on the screen.
You can check the current status as well as the cleaning status of each drive.
Also, you can get a drive log and execute drive cleaning.
Drive Status
The status of the drive is indicated as follows.
• Library: Name of mounted library
• Drive ID: Drive ID in library
• Device: Name of device
• Media Type: Media type that can be used
• Status
OK
Normal
D (Disabled)
Use is stopped (An error occurs at the drive, or cleaning may be in
progress.)
F (Fault)
Use is not possible (There is a problem in the hardware
connection.)
• Volume: Name of volume mounted on drive
• Log: Gets log
Chapter 3 Using the Web Administration Screen
49
Advertisement
Table of Contents
