Gateway Configuration - Avaya G350 Installing And Upgrading

Running the Avaya Installation Wizard (Avaya IW)

Gateway configuration

1. Click Continue from the Security Files screen. The IP Addresses screen appears.
This screen displays the G350's ID, as well as the type of media module residing in each
slot of the G350's chassis.
Figure 77: The IP Addresses screen
2. Click the wrench icon corresponding to the G350 in the Action column.
The PMI configuration screen appears. The IP address and subnet mask of the PMI
should appear in this screen. Change this IP address and subnet mask in accordance with
your system specifications.
The Primary Management Interface (PMI) address is the interface used for the following
management functions:
- Registration of the G350 to an MGC
- Sending SNMP traps
- Opening telnet sessions from the G350
- Sending messages from the G350 using FTP and TFTP protocol.
Note:
You can assign any IP interface that the MGC recognizes to be the PMI.
Note:
168 Installation and Upgrades for the Avaya G350 Media Gateway