Avaya G350 Installing And Upgrading page 177

Figure 87: The TFTP Server screen
11. If you want to upload configuration and firmware files for IP phones to the G350 TFTP
Server, do the following:
a. In the Server IP Address field, enter the IP address of the machine hosting the files
that are to be uploaded.
b. Select the file transfer protocol (TFTP, FTP, or SCP) you want to use to upload the files
from the host machine. TFTP is selected by default.
c. The use of the SCP protocol is limited to copying files of 1 MB or less. Therefore, an
SCP server can be used for copying the script files, which do not exceed 128 KB, but
cannot be used for copying image files.
d. If you selected FTP or SCP, enter the username and password in the Username and
Password fields, and re-enter the password for confirmation in the Re-enter Password
field.
12. In the Select column, check any files you wish to upload. If you selected SCP as your
upload protocol, the checkboxes for the phone images are disabled. If a green circled
checkmark is displayed in the Uploaded column, the file has already been uploaded.
Firmware configuration
Issue 4 February 2007 177