Connecting and enabling a modem for remote access
Figure 32: G350 USB Modem Configuration screen
14. In the PPP IP Address field, enter the RAS IP address of the modem obtained using the
ART tool. See
page 21.
15. Enter the PPP Subnet Mask.
16. Select the authentication method:
If you have an Avaya Service contract, check Enable ASG Authentication to enable
●
remote access to the device. If you select this option, you must also install an
authentication file using the Gateway Authentication screen of the GIW
If you do not have an Avaya Service contract:
●
- Check Enable CHAP Authentication.
- In the CHAP Secret field, enter the CHAP secret key obtained using the ART tool.
- In the Confirm CHAP Secret field, reenter the CHAP secret key.
17. Click Continue. The Connect Modem screen appears.
70 Installation and Upgrades for the Avaya G350 Media Gateway
Run the Automatic Registration Tool (ART) for the RAS IP address
See
Run the Automatic Registration Tool (ART) for the RAS IP address
page 21.
on
(Figure
131).
on