S8300 Media Server Port Leds; The Front Panel Of The Avaya Mm312 Media Module - Avaya G350 Installing And Upgrading

Front panel description

S8300 Media Server port LEDs

Table 11: S8300 LEDs
LED
ALM
TST
ACT
In addition, the front panel of the S8300 has a LED labeled OK TO REMOVE, which is
connected to a button labeled SHUT DOWN. This LED indicates that the S8300 has been shut
down, and can be removed from the G350 chassis. Do not attempt to remove the S8300 without
instructions from a specially trained technician.

The front panel of the Avaya MM312 media module

The MM312 DCP media module front panel has 24 Digital Communications Protocol (DCP)
ports with RJ-45 network ports. The MM312 supports simultaneous operation of all 24 ports.
Each port can be connected to a two-wire DCP telephone. The MM312 does not support
four-wire DCP telephones.
Figure 41: The MM312 media module front panel
128 Installation and Upgrades for the Avaya G350 Media Gateway
Name Color
Alarm Red
Test Green
Activity Yellow
Meaning
An alarm is present.
Avaya Communication Manager is running.
When an S8300B is installed as an LSP, the
green light shows that the server is up and
waiting to provide service.
This LED is lit whenever a G350, a G700, an IP
telephone, or an IP console is registered with
the S8300. It is off when none of these IP
endpoints are registered with the S8300.