Front panel description
The front panel of the Avaya MM710 media module
The MM710 T1/E1 media module terminates a T1 or E1 trunk. The MM710 has a built-in
Channel Service Unit (CSU), so an external CSU is not necessary. The CSU is only used for the
T1 circuit.
Note:
For drop and insert, an external CSU is required.
Note:
Figure 46: The MM710 media module front panel
Note:
The six ports in the middle of the front panel are used for testing.
Note:
MM710 ports
The MM710 contains an E1/T1 port.
MM710 LEDs
LED
ALM
TST
136 Installation and Upgrades for the Avaya G350 Media Gateway
Name
Color
Meaning
Alarm
Red
The module type is not the type configured in
the MSG for the slot.
Test
Green
Either a test is being performed on the module
via the media server, or the module is
performing a self-test upon initial insertion.
1 of 2