The front panel of the Avaya MM717 media module
The MM717 high density DCP media module front panel has a 25 pair amphenol connector
supporting 24 Digital Communications Protocol (DCP) ports. To use the MM717 media module,
connect an amphenol cable to the port and to either a breakout box or a punch down block
containing RJ-45 or RJ-11 jacks, as needed. You can attach up to 24 two-wire DCP telephones
to these jacks. The MM717 does not support four-wire DCP telephones.
Figure 51: The MM717 media module front panel
MM717 ports
The MM717 contains a single 25 pair amphenol connector, which can be connected by an
amphenol cable to a breakout box or punch down block containing RJ-45 or RJ-11 jacks, as
needed.
Table 17: 25-pair amphenol connector pinout
Station port
Cable pair
1
White
2
White
3
White
4
White
5
White
6
Red
7
Red
8
Red
9
Red
10
Red
The front panel of the Avaya MM717 media module
Blue
Orange
Green
Brown
Slate
Blue
Orange
Green
Brown
Slate
Issue 4 February 2007
1 of 2
143