Figure 136: G350 USB Modem Configuration screen
50. In the PPP IP Address field, enter the RAS IP address of the modem obtained using the
ART tool. See
Run the Automatic Registration Tool (ART) for the RAS IP address
page 21.
51. Enter the PPP Subnet Mask.
52. Select the authentication method:
If you have an Avaya Service contract, check Enable ASG Authentication to enable
●
remote access to the device. If you select this option, you must also install an
authentication file using the Gateway Authentication screen
If you do not have an Avaya Service contract:
●
- Check Enable CHAP Authentication.
- In the CHAP Secret field, enter the CHAP secret key obtained using the ART tool.
See
Run the Automatic Registration Tool (ART) for the RAS IP address
page 21.
- In the Confirm CHAP Secret field, reenter the CHAP secret key.
53. Click Continue. The Change Root Password screen appears.
Running the Gateway Installation Wizard (GIW)
(Figure
Issue 4 February 2007
on
131).
on
219