Avaya G350 Installing And Upgrading page 65

Figure 27: G350 Serial Modem Configuration screen
14. In the IP Address field, enter the RAS IP address of the modem obtained using the ART
tool. See Run the Automatic Registration Tool (ART) for the RAS IP address
15. Fill in the remaining modem information fields.
16. Select the authentication method:
If you have an Avaya Service contract, check Enable ASG Authentication to enable
●
remote access to the device. If you select this option, you must also install an
authentication file using the Gateway Authentication screen of the GIW
If you do not have an Avaya Service contract:
●
- Check Enable CHAP Authentication.
- In the CHAP Secret field, enter the CHAP secret key obtained using the ART tool.
See Run the Automatic Registration Tool (ART) for the RAS IP address
page 21.
- In the Confirm CHAP Secret field, reenter the CHAP secret key.
17. Click Continue. The Connect Modem screen appears.
Connecting and enabling a modem (G350 without S8300)
on page 21.
(Figure 131).
on
Issue 4 February 2007 65