Advanced Setup Screens - Graco Reactor 2 E-XP2 Operation

Advanced Setup Screens

Advanced setup screens enable users to set units, adjust values, set formats, and view software information
for each component. Press
Advanced setup screen, press
to exit edit mode.
Note
Users must be out of edit mode to scroll
through the Advanced setup screens.
Advanced Screen 1 — General
Use this screen to set the language, date format,
current date, time, setup screens password (0000 –
for none) or (0001 to 9999), and screen saver delay.
Advanced Screen 2 — Units
Use this screen to set the temperature units, pressure
units, volume units, and cycle units (pump cycles or
volume).
333023D
to scroll through the Advanced setup screens, Once in the desired
to access the fields and make changes. When changes are complete press
Advanced Screen 3 — USB
Use this screen to enable USB downloads/uploads,
enable a logs 90% full advisory, enter the maximum
number of days to download data, enable specifying
date range of data to download, and how frequently
USB logs are recorded. See .
Advanced Screen 4— Software
This screen displays the software part number and
software version for the Advanced Display Module,
USB Configuration, Motor Control Module, and
Temperature Control Modules.
Advanced Display Module (ADM) Operation
33