Agilent Technologies InfinityLab LC Series User Manual page 133

9 Maintenance
Replace the Deuterium Lamp
1 Open the doors.
3 Unscrew the fan cover (1.) and remove it (2.).
1.
5 Unscrew the two lamp screws (Pozidriv).
Agilent InfinityLab LC Series VWD User Manual
2.
2 Locate the heater fan cover.
4 Unplug the lamp connector.
6 Remove the lamp and place it on a clean place.
NOTE
Do not touch the glass bulb with your fingers. It may reduce
the light output.
133