Running Measurements - Agilent Technologies 16718A Help Volume

Chapter 2: Task Guide
To select transitional timing or store qualified
If one of the settings in the recalled trigger setup conflicts with the
sampling mode configuration, it will be set to the closest setting.
Also, if the trigger setup uses a trigger function library that does not
exist on this mainframe, it will not load correctly.
To clear the trigger save/recall list
1. When the Trigger tab is displayed, select Save/Recall Memories from the
Clear menu.

Running Measurements

After you set up a trigger, you're ready to run the logic analyzer
measurement.
• "To start/stop measurements" on page 86
• "If nothing happens when you start a measurement" on page 87
• "To view the trigger status" on page 87
To start/stop measurements
To start measurements
1. Select the Run Single
Group Run Repetitive, or Run All
Run starts only the instrument you are using. Single runs gather data
until the logic analyzer memory is full, and then stop.
Repetitive runs
useful for gathering statistics.
Group Run
to group run in the Intermodule window.
86
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
, Run Repetitive
button.
keep repeating the same measurement and are
(or repetitive group run) starts all instruments attached
, Group Run Single ,