Pod Assignment Dialog - Agilent Technologies 16718A Help Volume

Chapter 3: Reference
Importing Netlist and ASCII Files

Pod Assignment Dialog

Name:
Type:
Pod Pairs
See Also
"To assign pods to one or two analyzers" on page 53
"To name an analyzer" on page 49
"To select the timing mode" on page 36
"To select the state mode" on page 40
"To turn an analyzer off or on" on page 49
130
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Lets you name the analyzers.
Lets you select the timing (asynchronous) sampling mode,
the state (synchronous) sampling mode, or turn the
analyzer off.
Can be dragged-and-dropped under one of the analyzers to
assign those channels to the analyzer or can be left
unassigned.