Agilent Technologies 16718A Help Volume page 13

Chapter 1: Getting Started
• "Step 2. Choose the sampling mode" on page 14
• "Step 3. Format labels for the probed signals" on page 17
• "Step 4. Define the trigger condition" on page 20
• "Step 5. Run the measurement" on page 21
• "Step 6. Display the captured data" on page 22
If you have previously saved a logic analyzer setup to a configuration
file, or if configuration files are included with an analysis probe, you
can load the configuration file to set up the logic analyzer and define
the trigger condition.
Once you have made a logic analyzer measurement, the measurement
can be refined by repeating steps 4 - 6.
Next: "Step 1. Connect the logic analyzer to the device under test" on
page 13
12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com